Plastic Putty is a water based, acrylic adulterated, ready-to-use and thin touch-up and filling putty including various minerals in its composition. It is developed for interior walls and ceilings.
It is resistant to water, humidity and impacts. Since it is produced by using acrylic binder of Swiss Clariant, it completely adheres and corresponds with the surface.
It is easy to apply by using trowel and spud. It saves you time and labour. It covers the contraction cracks and provides saving your paint that will be applied to the surface.
It is water-based. It doesn't contain any substances that are harmful for human health and environment. It has a high value of vapour permeability and lets the applied surfaces breathe. It keeps molds, bacterias and microbes away.
- Plaster, Stucco
- Gas Concrete
- Wood, Wallboard, Gypsum Boards
- Mineral Surfaces
- Glassfiber and Surfaces That Will Be Papered
- Concrete Surfaces and Parting Lines of Prefabricated Buildings
To avoid the water loss of paint and get better adherence to the wall, 1 kg Izole Lak Pure Acrylic Primer should be mixed with 5 lt of water and must be applied to the wall by using brush or paint roller until the surface is saturated. Acrylic Putty must be applied for slight imperfections and Rustik Putty must be applied for subtler imperfections.
Putty is applied as two layers. Second layer must be applied after the first layer becomes completely dry. It is recommended to apply Izole Lak Pure Acrylic Primer reduced by 10 lt water on the first layer. If you will use oil paint, we also recommend you to use Izole Lak Pure Acrylic Primer reduced by 1 to 15 ratio water before the application.
The surface becomes dry in 12 hours under the temperature of 20oC and 65% humidity conditons. It takes 36 hours to be resistant to impacts and dry completely.
For the application of Plastic Putty, the surface must be stable and solid. So if it is applied in a new construction, four weeks are needed for the hardening of the cement.
Izole Lak Pure Acrylic Primer: 0.020-0.030 kg/m2
Plastic Putty: 0.500-1.000 kg/m2
The material must be stored in cool environments and must be prevented against frost. The product must be used within 12 months.
Plastic Putty is packaged and introduced to the market as 30 kg tin cans and 5, 20 kg poliethylene buckets.